Gear

Garrett Pro-Pointer AT vs Minelab Pro-Find 35

Garrett Pro-Pointer AT pinpointer

CoilAndCoin is reader-supported. If you buy through our links we may earn a commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Disclosure.

Quick answerBoth weigh about 6.5 ounces, and both have a flashlight. The Garrett Pro-Pointer AT goes deeper underwater (20 ft vs 10 ft, per the makers) and has a lost-pinpointer alarm. The Minelab Pro-Find 35 gives you five sensitivity levels instead of three, a ferrous tone and vibration alerts, per its listing. If you'll be working in water deeper than 10 feet, Garrett's rating is the one that covers it. If you want finer sensitivity control, look at the Pro-Find.

A pinpointer saves a lot of poking around in the hole. Here are Garrett's and Minelab's models side by side. Specs are from Garrett's and Minelab's pages and the listings. We haven't tested them.

Side by side

Pro-Pointer ATPro-Find 35
Waterproof20 ft (6 m), IP68 (Garrett)10 ft (3 m) (Minelab)
Sensitivity3 levels (Garrett)5 levels (Minelab)
Weight6.5 oz with battery (Garrett)6.6 oz (Minelab)
FlashlightYesYes
AlertsAudio; Stealth Mode vibrate-only (Garrett)Audio and vibration; ferrous tone ID (listing)
ExtrasFast retune; Lost Pro-Pointer Alarm; holsterDIF tech to reduce interference with a running detector; holster, lanyard (listing)
Battery9V, included (Garrett)See listing

The picks

Garrett Pro-Pointer AT
20 ft waterproof

Garrett Pro-Pointer AT

  • Submersible to 20 ft, per the listing
  • 3 sensitivity levels; fast retune
  • One-button control; stealth mode
  • Molded inch/cm ruler; lanyard loop
Check price on Amazon
Minelab Pro-Find 35
5 sensitivity levels

Minelab Pro-Find 35

  • Waterproof to 10 ft (3 m), per the listing
  • DIF tech; ferrous tone ID
  • 5 sensitivity levels; audio and vibration
  • Flashlight, holster and lanyard
Check price on Amazon

Related options

If you run a Garrett detector with Z-Lynk, the Pro-Pointer AT Z-Lynk version sends its audio to the same wireless headphones, per its listing. Minelab's Pro-Find 40 is also listed waterproof to 10 ft with five sensitivity levels, and Nokta's AccuPOINT adds Bluetooth audio and a color screen.

Garrett Pro-Pointer AT Z-Lynk
Z-Lynk wireless

Garrett Pro-Pointer AT Z-Lynk

  • Z-Lynk wireless audio with Z-Lynk detectors and headphones, per the listing
  • Submersible to 20 ft
  • Belt holster and 9V battery included
Check price on Amazon
Minelab Pro-Find 40
Pro-Find 40

Minelab Pro-Find 40

  • Fully waterproof housing, per the listing
  • DIF tech to reduce interference with a running detector
  • Ferrous tone ID; 5 sensitivity levels
  • Audio plus vibration; flashlight, holster and lanyard
Check price on Amazon
Nokta AccuPOINT Pinpointer
Bluetooth, color LCD

Nokta AccuPOINT Pinpointer

  • IP68 waterproof to 10 ft (3 m), per the listing
  • Bluetooth audio
  • 1-tone, 2-tone or iron-off discrimination
  • Color LCD; volume and backlight control
Check price on Amazon

More options, including budget picks, in our pinpointer guide. Then finish your kit with a digger.

FAQ

Pro-Pointer AT waterproof depth?

20 ft, per Garrett.

Pro-Find 35 waterproof depth?

10 ft, per Minelab.

More sensitivity settings?

Pro-Find 35, five vs three.

Sources

  1. Garrett: PRO-Pointer AT
  2. Minelab: Pro-Find 35 specs
  3. Minelab: Pro-Find 40 specs